After the Æneema’s success, expectations were high to create a better and more advanced wave kite. And although we (and so many kiters around the world) love the Æneema, we still felt that there was much room for improvement.
We wanted to create a wave kite that turns super fast but at the same time keeps the best elements of our early BWSurf Noise models, primarily drift and stability. With the Æ2 we can proudly say we’ve succeeded in this mission. The Æ2 is a complete re-design with a smoother profile and faster turning achieved in part through altering arc shapes through each size. The response on the wave and drift is far greater than any other kite we have made or flown. A tricky combination to achieve but one that delivers a far more user-friendly performance to the rider and will make riding in waves (or landing freestyle tricks) smoother and more achieveable for all levels of rider.
Each size of Æ2 has been specifically designed for its purpose and wind range (no up or down scaling). The Leading Edges in bigger sizes are lighter and thinner but still hold enough volume for a rigid frame and fast relaunch. Additionlally, each kite size has its own specific bridling frame for best performance.
Æ2 is an incredibly high performance and complete wave kite for ALL conditions and ALL levels.
OUR KITE DESIGNER ON THE Æ2
“Æ2 is the continuation of the Æ1 and has been built for riding in demanding conditions based on my personal experiences. From light summer breezes to intense Typhoons, this kite has seen it all. The new refined SD profile (Smooth Drift) of the kite makes a much smoother power delivery and feeling in the bar while enhancing the turning speed and performance through all areas of the 3D window.
Each size has been designed for the specific conditions and is not simply a scale up of the shape. It has different over all aspect ratios through the range; lower in the smaller and larger sizes, while maintaining a medium aspect through the mid range for best performance. The Æ2 offers an enhanced sensation while riding the wave yet you don’t know the kite is there. After the first turn for initial setup the kite will just follow you down the line with absolutely no pull, allowing you to ride the wave. But when needed the kite is super responsive, just sheet in to get around that section and set yourself up for the next lip annihilation! The Æ2 is hands-down the most user friendly wave kite to date!” – Dano See
Our new factory in Philippines has a long and rich history of manufacturing high-end sails for the global sailing market. This new partner factory has headquarters in the UK and is all about forward thinking, quality and finding the best possible solution to deliver you a product we can all be proud of.
Ben on the Æ2
“I’ve always been proud of our performance and design so now what I’m most excited about is creating the highest possible quality in the industry. I want anyone who has our product to have the best experience in performance and sensation, but also have the longevity and durability. I feel like we’re finally there.” – Ben Wilson
Features of Æ2.S
We started building Æ2 from scratch with all new, premium materials, and high quality finishing for the maximum durability. The graphics on Æ2 are a continuation of Æneema but with far more detailing that compliments its rich finishings. The canopy colors have been exclusively developed for BWSURF so you won’t see them anywhere else.
At BWSURF we are always evolving and learning. We’ve worked hard to ensure our production is flexible enough to keep up with our demands and dynamic enough to make changes on the fly. It’s this ability to adapt and grow that sets us apart.
Our Search for Perfection never ends.
The 2019 Æ2 retains the design of the original version but incorporates a selection of the latest materials enhancing the overall performance and durability. Introducing the Æ2.S.
3 strut lightweight design
The Æ2 features a super-thin profile with reduced diameter and lighter LE for fast flying and turning. This lighter canopy design also improves glide and prevents stalling through any lulls or low spots in the wind. Medium thickness struts accommodate the rigid frame for a seamlessly clean canopy shape; no flutters or wrinkles that cause drag.
Custom wingtip design
A completely new and longer wingtip design for fast pivot turning allows full flow through all turns and NO stalling or dead spots in any area of the window. The Æ2 features a stiffer profile which makes the turning and handling of the kite even better than it was before.
The stable 3-point short surf bridle is compact and has no pulleys and is born from all-new weight distribution technology. Each string is custom-weighted to each point, allowing an even weight distribution when powering the kite on and off. This keeps a truly tight canopy with no distortion. The bridle holds the weight of the kite perfectly when sheeted in, but what happens when you sheet out? Our new bridle’s custom point weight distribution allows the kite’s weight to be distributed evenly through all phases of sheeting.
Canopy DBL Ripstop 50 denier by Chang-Ho, a leading Taiwanese manufacturer. All Æ2 canopies are exclusive colors made especially for BWSurf.
*NEW* for 2019 Dacrons 165 KPE by the German manufacturer Dimension Polyant, for increased profile rigidity that translates to an amazing, direct feel and improved handling of the kite.
Dacron 3.8 TE by Challenge à softer for hard wearing flap, used in trailing edge.
210 Gitter is an all new material from the sailing biz that is used in the wingtips. This material stiffens the kite’s frame, improves turning ability, and helps relaunch super fast after a crash in the surf.
*NEW* for 2019 Capetown FL610 bridle lines from premium German line manufacturer, Teufelburger. Selected for the incredibly low elongation test results and even greater durability and performance.
*NEW* for 2019 bladder material with a dry yet slippery coating, translating to minimal friction, reduced wear and easier replacement. Made from the latest V2 TPU Film 0.1mm these are crafted the strongest TPU bladder material for its weight available to date.
*NEW * for 2019 ultra clean 2016 TPU airlock kite valve. No more nozzles! This inflate valve fits all kite pumps. It’s quick, simple, with no tricky attachments.
Protectors have been added on the LE along the wingtip area preventing wear and tear and ensuring longer durability.
All connectors from strut to LE + in/deflate valve have neoprene covers preventing the canopy from wear and tear.
Dacron on the struts as extra protection in the surf – Surf Proof.
Scuff guards: The right scuffs in all the right places. Positioned so your kite will withstand being dragged over rough surfaces without compromising its weight and strength.